What can we do if Windows 10 won’t start? Solutions

Share on facebook
Share on twitter
Share on linkedin
Share on reddit
Share on email
Share on whatsapp

Table of Contents

If we are unlucky enough that our operating system Windows 10 won’t boot, we can safely say that we are facing a serious and extremely frustrating problem, especially if it is not essential to work. Well, we are going to show you various solutions that you can try to try to solve this problem.

The problems that can cause Windows 10 not to start can be very varied and can be due to a very simple problem to solve or a quite serious one, since it can cover many causes. Many times the operating system itself shows us hints that something is wrong, but there are so many symptoms that we could be talking about it for several days. So we are going to focus on possible solutions that we can do to try to solve it.

Safe Mode

With this mode we get Windows start with as little as possible, that is, only what is essential to avoid any type of error as much as possible. It has been the case, more than once, that after starting in Safe Mode and restarting the computer again, it starts up without problems.

To enter safe mode we must force the system to shut down three times, that is, turn on the computer and shut it down forcibly until, after three times, we will get the Windows recovery environment.

  • On the screen that appears we must click on Solve problems.
  • After in Startup Settings.
  • Now we must search Advanced Options and then Startup settings.

safe mode windows 10

That is where we can enable Safe Mode to see if we can get it to start and within it we can open Windows PowerShell (Command Prompt) to launch two commands and check that the hard drive is fine, as they are SFC / scannow and chkdsk / f / r.

Recovery environment

As we have already seen how to enter the Windows 10 Recovery Environment, we must try another of the options that Windows has at our disposal.

  • Once we are in Recovery Mode, click on Solve problems.
  • Then Advanced Options and finally in Home Repair.

Now we must wait for this system to detect the problem that prevents Windows from starting and to solve it so that everything returns to normal.

Disconnect devices

Oddly enough, the cause of the system not starting may be a device you have in the USB and that Windows is not able to detect your drivers or any other reason, so the boot enters conflict. If you’ve been using this device for a long time and you realize that when you plug it in, Windows won’t start, that means there has been some kind of error and it would be good to reinstall the drivers.

Disconnect USB

Battery if portable

It can also happen that having a battery that is in bad condition can influence the starter to have failures and not be able to execute. To check this, we should have the charging cable connected to our laptop, check that it charges and then run Windows 10. If the system starts up without problems, it could be that the battery is not in perfect condition and we should contact the computer technical service so that they can check it and if it is indeed damaged, change it for another.

Disable Fast Boot

There is an option in the BIOS (practically on all more or less new computers) that has the function of making Windows 10 start faster. It may have happened that there is some type of incident with this function and that it is the cause of the failure.

What we must do is enter the BIOS of our computer and disable this feature. This way we can check if it is the cause of the system not starting.

Reassign drive letter

It may be the case that a computer with multiple disk drives may cause a boot conflict, especially after a major update.

The way to fix it is to re-enter Windows PowerShell (Command Prompt) within Windows Safe Mode, as we saw in the previous steps.

  • Once inside we must write diskpart and press the key Enter.
  • When the process is finished we have to write list volume and press Enter, so that we can see the units and letters that each one has.
  • If we see any error with the commands select volume X (X is the drive letter) and assign letter X we can solve it.
    • select volume X: to select the unit you want.
    • assign letter X: to change the drive letter.

Diskpart Windows 10

Restore or reinstall Windows 10

If nothing we have talked about has worked, it is time to take the solutions to a slightly more radical section. I mean, we can try restore the system to a previous version where there was no type of error or reinstall system directly.

For this we must go to Recovery mode and in choosing the option that best suits us, knowing that if we restore we will lose the information that we have accumulated from the day we recover until today, in addition to that, if we install the operating system again, we will lose everything, since the system will appear as if it were new. Obviously everything that is in the same unit where Windows is going to be reinstalled is lost, the rest of the disks will continue to have their own information.

We also have the option of restore the operating system to factory, that is, the operating system would erase everything that has accumulated over time and leave it as if we took it out of the store. It is different than reinstalling the system, since depending on which version we reinstall, this is how the system will be. In the case of restoring to the factory, it will be as if you were a new computer, but within the version we had.

Now it is up to each one to choose which one they want, since all the options have their good and bad part. The truth is that they are the last options that we can try so that Windows 10 can start.

The post What can we do if Windows 10 won’t start? Solutions appeared first on ADSLZone.