For years, both desktop computers and laptops and even some tablets have one or more USB ports so that we can connect certain devices to them. However, it may be that right off the bat we connect something to our computer through a USB port and the system does not detect it. Next, we are going to show how to fix the problems with a USB port not working in Windows 10 and 11.
Problems with the USB ports on a Windows desktop, laptop, or tablet can be caused by a variety of reasons. From a software update that has disabled them for some strange reason to more physical reasons such as dirt or something that is obstructing the port in question. Be that as it may, this is a summary of problems and solutions.
First of all, the first thing we need to know is if the problem is in the USB port or is it the device itself. To do this, we can try to connect it to another port to see if that is how it works or connect it to another computer. If the device is detected normally in another port or on another computer, then it is clear that the problem is in that port.
Although it is usually one of the first things that come to mind when we encounter an error of this type, it is worth remembering that we can restart our computer to see if the problem is solved. Restarting or turning the computer off and on again can cause a specific error to be solved and when the system reboots with all the services and drivers, everything will work correctly again.
In that case, we can try clean the USB port well that does not work, since the accumulation of dust or any rest of dirt can be the cause of our problem. With a blower we can try to remove any type of dirt from the USB port that does not work, restart the computer and check if the problems have been solved.
If not, then we may have a problem at hardware level, that is, that the USB has failed, or that the software that controls it is the one that is not able to recognize the device that we have connected. In the first case, replacing a USB port that does not work is not an easy task, since, in general, they are usually soldered to the motherboard. Therefore, the only solution would be to replace the entire motherboard.
Taking into account that most of the external devices that we connect to a USB port of the PC need power from the PC, if when connecting a device to a port it does nothing, it is possible that there is a damage in the power supply of the port. Some of the symptoms of this type of damage is seeing that the connected device does nothing, reboots or hangs without any explanation, they make a lot of noise and of course, they smell like burning.
Sometimes the simplest solution is the one we can’t think of and the problem it’s not actually in the computer’s USB port. In this case, we must make sure that the pendrive or USB peripheral that we are trying to connect works correctly. On a physical level, we will check that the cable is not damaged and that the connector is clean. Nothing should have been wet with water or exposed to any kind of liquid.
To check this, the quickest thing to do is turn to another computer. Just plug it in and see if it works or not. If it works, then we can continue to rule out problems on the original computer. If it does not work, the problem is in that USB memory or USB device that does not finish working correctly.
It is possible that the failure of a USB port on our computer is related to a virus or malware that has lodged on our computer. We could even find that a USB port stops working when we connect a specific device, and it may be the device itself that is infected and not the computer. Therefore, it is convenient to try to connect other USB devices in that same port to see if it fails with all of them or with only one.
In this case, the ideal would be to try
to clean the device in question, although it never hurts to carry out a complete analysis of our computer to see if we have any virus or malware that may be causing a failure in one or more USB ports of the computer.
If the system shows us an error window referring to code 43, it is important to know that this error refers to a specific hardware problem in the device that is connected via the USB cable. Therefore, this means that there is a bad connection or the cable is damaged and hence the device cannot be recognized. In this case, we can do a test by connecting the same device with another cable to check if the problem is resolved.
However, on some occasions, we can also avoid this code 43 error by deactivating power saving and universal bus controller from the system device manager.
But, first of all, we can check if the driver that controls our USB port that does not work is correctly updated. To do this, we open the Windows 10 and 11 Device Manager, we look for the universal serial bus controllers and we deploy that option.
There we will find the Microsoft Host Controller, which is on which we have to click with the right mouse button to later select the option Uninstall the device from the contextual menu. If we have more host controllers, we must repeat the process with each one of them and once we have all eliminated, we restart the computer so that Windows can install them again and check if the problem is solved.
If we do not find any USB host controller in the Device Manager, then we must go to the upper menu option Action> Check for hardware changes and wait for the system to verify the hardware of our equipment to verify that the USB driver appears.
If the problem persists and the USB port does not work, we can try disable USB selective suspend featureas the power settings may be overriding the USB driver and causing it to malfunction. Remember that USB selective suspension is an energy saving setting that has the ability to reduce the use of our laptop’s battery by making a kind of cut in the equipment’s power supply.
Having this function active on the computer means that the USB controller of the computer can be overridden and that, therefore, the USB port may not work as it should. Therefore, we can try to disable it and see if the problem disappears.
To do this, we open the Control Panel and we are going to Hardware and Sound> Power Options. Now we enter Change plan settings and then Change advanced power settings.
From the Power Options window, we look for the USB Configuration option, we deploy and within USB Selective Suspension Configuration we deactivate the property. If we have a laptop, we will have the option of deactivating this option both when we are using the battery and when we have the equipment directly connected to the power. Finally, we restart the computer and check if the USB port that does not work is already able to detect a device connected to it.
If all of the above does not work for us, we have to do more complicated things and reserved only for the most advanced users. We recommend that you go ahead only if you know what the Windows 10 and 11 registry is and if you have ever “touched things” in there. Otherwise, it is best to look for other alternatives, such as replacing the computer, formatting or any other more drastic solution.
To access the registry we will press the Windows + R key combination and type regedit. We will press enter and the Windows registry will open. There we will have to look for the registry key:
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesUSB]
In which we will look for the entrance DisableSelectiveSuspend. If it doesn’t exist, we’ll right-click an empty area and then New> DWORD (32-bit) value. We will name it DisableSelectiveSuspend and double click to assign it the value 1. We will restart the PC so that the changes are applied.
The post USB does not work for you in Windows? Here’s how you can fix it appeared first on ADSLZone.
Exploring the Top 5 Voice AI Alternatives: What Sets Them Apart?
How iGaming Platforms Ensure Seamless Integration of Casino Games and Sports Betting?
The Rise of Spatial Computing: Evolution of Human-Computer Interaction
Data Loss on Windows? Here's How Windows Recovery Software Can Help
Integrating Widgets Seamlessly: Tips for Smooth Implementation and Functionality