We buy a new Smart TV, it comes home, we open the box, carefully remove it, place it on the cabinet, and begin the process of connecting the cables. First the DTT antenna, then the HDMI cable of the console, then the power cable and… how do we connect it to the Internet? Here begins the dilemma that will make us have to choose between the wired connection using an ethernet network cable or the wireless connection using WiFi technology. Although it may seem like a simple decision, the truth is we must keep several things in mind, first of all.
Smart TVs are already the connected multimedia center of the home and, for this, they need a quality Internet connection. This connection will be key to offering good performance in applications such as Netflix, HBO, Amazon Prime Video … but also in any other connected service that the television offers us. To give us an idea, Netflix in 4K needs 25 Mbps per second to run, YouTube in 4K will run at 20Mbps and Amazon Prime Video at 5Mbps will be able to play HD content.
Before entering to assess the pros and cons of wireless technology, we must know the WiFi standard with which our Smart TV is equipped. The normal thing is that we have WiFi 4 or WiFi 5, being reserved the new WiFi 6 to the most modern and high-end models. The theoretical speed of these modalities is 300 Mbps, 1.3 Gbps and 9.6 Gbps, although in practice we will have much less speed.
The speed offered by a WiFi network is seen tremendously influenced by various factors. In the first place, the aforementioned of the WiFi standard, both the one we have in the router and the one that is capable of supporting television. It will be useless to have a brand new state-of-the-art wireless router if our television does not support that technology.
Another aspect that influences the speed we receive from the wireless network resides in the location of the router. If it is very far away, if there are many obstacles in between, such as walls, if there are electrical appliances “polluting” the frequency spectrum … and so on for a long list of reasons that make it not the most stable type of connection in the world.
WiFi networks also depend on WiFi channels. In the case of being in a community with many neighbors, this connection may not perform as well as it should due to the saturation of the channels. Today’s routers are able to choose the best channel, but this does not always work perfectly.
The latest standards such as WPA3 offer many improvements at the security level, but cases of vulnerabilities that allow attacking these networks. Wireless networks suffer from these problems and, without going any further, the study published in May 2021 under the name of “Fragment and Forge: Breaking Wi-Fi Through Frame Aggregation and Fragmentation” shows that vulnerabilities that affect from WEP to WPA3.
Despite all the above, WiFi is much more convenient. It is enough to check that the signal reaches the device in question and proceed to the connection by entering the password that we have defined (or that we have defined by default in the router). No need to wire your house or figure out how to get a cable from the router to the TV. In some cases, due to range issues, we may need a WiFi repeater to boost the signal, but this investment will also be useful for mobile phones and other portable devices.
Now that we know what we gain and lose using a WiFi wireless connection, we have to see what a network cable connected directly to the router offers us. In this case, we must have the television close enough to the router, choose to wire the house with ethernet cable or invest in a PLC system that carries the connection from one side of our home to the other through the use of the electrical network.
The cable always guarantees the maximum speed that the device is capable of “receiving” depending on its network card. The big problem with Smart TVs is that they have Fast Ethernet ports that support a maximum of 100 Mbps speed. This means that, although we have contracted 300 or 600 Mbps, television you will not be able to use more than 100 Mbps. Luckily, Gigabit Ethernet is being incorporated in the most current and cutting-edge models to avoid these types of drawbacks.
Beyond that speed problem due to the type of ports that manufacturers choose, cable is the most stable connection since it is not affected by as many factors as WiFi. It must be taken into account that the maximum range of these connections of about 100 meters, something that should not be inconvenient in a conventional home.
The security of an ethernet cable is the maximum possible since, unless the information from the router or the Smart TV is “accessed” while it travels through the cable, it’s (almost) impossible to hack. If we prioritize security above all else, the cable will be our ally and we will leave the WiFi for cases in which we have no other option, such as mobile phones.
If WiFi was the paradigm of comfort, cable can pose many more challenges for us
. In case of having the router at the same point as the Smart TV, connecting by cable will have no mystery. However, if we have the router in one room and the television in another, we will already have to opt for other types of solutions that we have already briefly discussed.
The first would be to wire the house with network cable, taking this from one room to the other. This is not complicated if we have some basic notions of facilities, being able to take advantage of the existing ones at home for television. The second option is use a PLC placing a plug in the room where we have the router and the other next to the Smart TV.
However, connecting cable TV is much faster than doing it over WiFi. In general, simply connect the cable and everything will be configured automatically. In the case of the wireless connection, we will have to search for the WiFi network and enter the password, a tedious process with the remote control in case of having a long password.
Reading all of the above, my conclusion is that you should always opt for cable when possible. However, it is also true that, in certain circumstances, WiFi can offer us great performance. If we only have cable available and it works fine, we won’t do anything. If we do not have cable and the WiFi is good, we will not make any decisions either.
But what if I have both options? Well, the best thing is to do a Speed test of both technologies to check their performance. If the television is limited to Fast Ethernet, a quality WiFi connection may perform somewhat better. However, my personal recommendation is that, whenever we have the possibility, we connect the Smart TV by cable (applicable to all types of devices).
If we want to connect a TV of Samsung we will access:
To connect by cable we will go to:
The manufacturer notes that “Your TV’s wired network connection is automatically configured when you connect it to a network that supports DHCP. The TV will try to connect to the network. A confirmation message will appear once the connection is established ”.
The manufacturer offers us these instructions to connect your televisions to the Internet with webOS:
The instructions it indicates Sony to connect your TVs over the Internet are:
In the case of wanting a WiFi connection, the instructions provided by the manufacturer are:
When using Android TV As an operating system, we can configure the WiFi connection at the time of the initial configuration. It will be enough to do the process with Google Assistant logging in with our Google account. In this way, the WiFi password is automatically shared. In case you want to do it a posteriori, we will follow these steps:
If you want a wired connection, simply connect the network cable and the television with Android TV will use this mode by default.
The post Cable or WiFi: What is better to connect your Smart TV to the Internet? appeared first on ADSLZone.
Exploring the Top 5 Voice AI Alternatives: What Sets Them Apart?
How iGaming Platforms Ensure Seamless Integration of Casino Games and Sports Betting?
The Rise of Spatial Computing: Evolution of Human-Computer Interaction
Data Loss on Windows? Here's How Windows Recovery Software Can Help
Integrating Widgets Seamlessly: Tips for Smooth Implementation and Functionality